Skip to product information
Roco 10520 Switch box c/w 4 x Switches to control 4 x Turnout (point) solonoids
  • Roco 10520 Switch box c/w 4 x Switches to control 4 x Turnout (point) solonoids
  • Roco 10520 Switch box c/w 4 x Switches to control 4 x Turnout (point) solonoids
Roco 10520 Switch box c/w 4 x Switches & LEDs for Point (Turnout) motors

Roco 10520 Switch box c/w 4 x Switches & LEDs for Point (Turnout) motors

$78.00 NZD

Suitable for all gauges, this modern Passing Contact Switch unit with position lights is excellent value as it enables operation of 4 x Point (Turnout) motors.

LED's:  Green - Point is set to straight.  Red - Point is set to Turnout.  Orange - faulty operation.

Supplied with 2 x Contact pins to enable multiple switch box units to be connected side by side.

This Switch unit can be used to activate most twin Solenoid Coil Point motors such as Seep PM1 or PM2, Peco PL10 or PL11 or Hornby R8014 or 8043.

However, for the LED Position lights to work, you will need to use a Solenoid Point motor with an "End of throw disconnect" such as the Roco 10030 (under bench solenoid motor) or Roco 40295/40296 or 32418/32419 (surface mount) solenoid motor.

NOTE: This unit is not suitable for use with slow action Point Motors such as the Tortoise, or DCC Cobalt Point motors.

Operating voltage: 14-16 V AC, Max .5 Amp

Supplied c/w 4 x 10603 3-pin connectors. 

You may also like